Very Gorgeous and Stylish Design For 2020 Italy Espresso Machine
Our company are selling a new Italian espresso machines and branded coffee grinder.
Highlights and differences compared to other competitors products
Machine with differentiated temperature regulation (multiboiler type)
Boiler and pipes all in stainless steel
Frame completely in stainless steel (except for 2 side panels in normal painted steel)
Seamless frame or use of self-tapping screws. All assembled with metric threaded screws and heads (this guarantees a perfect assembly during subsequent revisions or the replacement of any component)
Basin and adjustable cup support grill without screws for tall Cup use
SERTO stainless steel fittings (http://www.serto.com/chit/) High quality Swiss products (and Swiss cost)
Group temperature regulation system with independent and dedicated display (we could have use only one display for the 2 groups such as for exemple Vibiemme does)
Temperature control system of the primary boiler with display adjustable also externally, therefore, instead of a single pressure switch with screw adjustment inside the machine, a probe is used on resistance in addition to static relay plus display (the cost is more than doubled )
First of all, the group is dry (that is, it never has "stopped" water that could take unpleasant odors and deposit the limestone in the group). When extraction is commanded, in a few tenths of a second the water is "called" from the exchanger into the boiler and corrected in the desired temperature in a few seconds before extraction. The large heat exchanger, unlike the competition, is horizontal and not vertical, and totally immersed, thus guarantees a large provision of water for coffee (already prepared at 90% of the temperature in high quantities) and a very high stability. The final temperature is refined in the exchanger which overhangs and heats the group, with a resistance of 3 X 1500= 4500 W, dedicated.
Ours system is different if compared to the Dalla Corte, because our group head is a dry one. According to our experience with machines like Dalla Corte and similar, it is more complicated to replace an heating element because you MUST open the boiler -not the main one- with all technical consequences and annoyances, in our one the intervention of maintenance is very fast and the limestone problem is very small
"Cold" steam wands: the wands are made of stainless steel with a special chamber in high temperature material that isolates the external material; therefore the external wands, will always be maneuverable by the barman without the need of unaesthetic rubbers.
Details in painted Canaletto walnut wood and aluminum side panels.
Machine with differentiated temperature regulation (multiboiler type)
Boiler and pipes all in stainless steel
Frame completely in stainless steel (except for 2 side panels in normal painted steel)
Seamless frame or use of self-tapping screws. All assembled with metric threaded screws and heads (this guarantees a perfect assembly during subsequent revisions or the replacement of any component)
Basin and adjustable cup support grill without screws for tall Cup use
SERTO stainless steel fittings (http://www.serto.com/chit/) High quality Swiss products (and Swiss cost)
Group temperature regulation system with independent and dedicated display (we could have use only one display for the 2 groups such as for exemple Vibiemme does)
Temperature control system of the primary boiler with display adjustable also externally, therefore, instead of a single pressure switch with screw adjustment inside the machine, a probe is used on resistance in addition to static relay plus display (the cost is more than doubled )
First of all, the group is dry (that is, it never has "stopped" water that could take unpleasant odors and deposit the limestone in the group). When extraction is commanded, in a few tenths of a second the water is "called" from the exchanger into the boiler and corrected in the desired temperature in a few seconds before extraction. The large heat exchanger, unlike the competition, is horizontal and not vertical, and totally immersed, thus guarantees a large provision of water for coffee (already prepared at 90% of the temperature in high quantities) and a very high stability. The final temperature is refined in the exchanger which overhangs and heats the group, with a resistance of 3 X 1500= 4500 W, dedicated.
Ours system is different if compared to the Dalla Corte, because our group head is a dry one. According to our experience with machines like Dalla Corte and similar, it is more complicated to replace an heating element because you MUST open the boiler -not the main one- with all technical consequences and annoyances, in our one the intervention of maintenance is very fast and the limestone problem is very small
"Cold" steam wands: the wands are made of stainless steel with a special chamber in high temperature material that isolates the external material; therefore the external wands, will always be maneuverable by the barman without the need of unaesthetic rubbers.
Details in painted Canaletto walnut wood and aluminum side panels.
After various tests we have seen that we can install boiler electric heater from 3750Watt instead of 4500, saving on consumption but having the required performance.
Also, if you will have customers asking for lower consumption, we can install 2600Watt resistance, we'll keep it as an option.
Also, if you will have customers asking for lower consumption, we can install 2600Watt resistance, we'll keep it as an option.
Notes:
Due to the light and screen setting difference， the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Due to the light and screen setting difference， the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
We do not keep stock. All the machine are manufacturing from Italy. Upon the order the factory will only start to manufacture it. It may take a bit longer. Please be patient. The duration from booking to arriving Malaysia is approximated 5 weeks or longer. We will try our best to delivered to the customer door step as soon as possible.
The New VIPER Italian Coffee Machine is the yin, to your yang. You've found what you're looking for.
Inventory Last Updated: Apr 26, 2024
Inventory Last Updated: Apr 26, 2024